Bottle Usage and Storage Guide
Follow the steps below to use the water bottle safely and hygienically, as well as to ensure the uninterrupted operation of your dispenser.
Before placing the bottle on the dispenser, it is necessary to:
- Wipe it with a damp cloth, especially the cap and the upper part of the bottle, so that the areas that come into contact with the dispenser probe are free of dust.
- Remove all protective films and paper from the cap.
For a bottle installed on the dispenser, it is recommended to:
- Consume the water within 25 days after installation.
- Keep the bottle and dispenser away from direct sunlight.
As soon as the water runs out, unplug the dispenser before installing a new bottle to avoid malfunction.
It is recommended to replace the dispenser bottle while a small amount of water still remains in it so that the dispenser tanks stay full. This helps prevent room air from entering the tanks and, consequently, prevents dust from getting inside.
After use, please keep the bottle clean and away from sunlight (otherwise microorganisms may develop in the residual water, causing the bottle to turn green and requiring it to be discarded).
Bottles must be returned. In case of damage or failure to return a bottle, a compensation charge of AMD 6,000 (six thousand) applies for each bottle.